Cable
　　Power cable
　　Speaker cable
　　RCA cable
　　Microphone cable
　　Coaxial cable
RCA interconnect series
Fuse holders
Fused distributions
Power distributions
Battery terminals
Amplifier install kits
Fuses
Couplers
Terminals and adaptors
Crimp terminals
Speaker termination
Butt connectors
Adapter
rg59.gif (3943 字节) rg6.gif (4038 字节) rg7.gif (3989 字节) rg11.gif (3970 字节)
Type Center conductor Insulation Braid shieid material Jacket material Jacket diameter Attenuation@68°F.(20°C)250mhz/100m
Material No/Diameter Material Diameter A/mm B/mm C/mm
RG59 BC/CCS 1/0.81MM FPE 3.66MM BC/TC/AA PVC 6.10 6.10 6.73 13.45DB
RG6 BC/CCS 1/1.02MM FPE 4.57MM BC/TC/AA PVC 6.91 7.06 7.62 10.82DB
RG7 BC/CCS 1/1.30MM FPE 5.72MM BC/TC/AA PVC 8.08 8.20 8.59 8.40DB
RG!! BC/CCS 1/1.63MM FPE 7.11MM BC/TC/AA PVC/PE 10.03 10.03 10.29 6.72DB
A. Standard shield

B. Quad shield
Solid RF coaxial cable
TYPE Center conductor Insulation Braid sheld Jacket NOM.
imped		 Attenuation
(100MHZ)
DB/KM
Material NO./DIA
(MM)		 Material NO./DIA
(MM)		 Material NO./DIA
(MM)		 Material Outer DIA(MM)
RG174/U CCS 7/0.16 LDPE 1.52 TC 16/5/0.10 PVC 2.54±0.15 50±3 259
RG58 C/U BC 19/0.18 LDPE 3.0 TC 16/7/0.12 PVC 4.95±0.15 50±3 174
RG58/U BC 1/0.81 LDPE 3.0 TC 16/7/0.12 PVC 4.95±0.15 53±3 133
URM70 BC 7/0.18 LDPE 3.3 BC 16/6/0.12 PVC 5.8±0.20 75±3 176
RG59B/U BC/CCS 1/0.58 LDPE 3.7 BC 16/7/0.12 PVC 6.15±0.20 93±3 112
RG213U BC 7/0.75 LDPE 7.25 BC 24/5/0.15 PVC 10.3±0.20 50±3 69
10MHZ
3C-2V BC 1/0.5 LDPE 3.1 BC 16/7/0.12 PVC 5.4±0.15 75±3 42
5C-2V BC 1/0.8 LDPE 4.9 BC 16/9/0.14 PVC 7.4±0.15 75±3 27
7C-2V BC 7/0.405 LDPE 7.3 BC 24/7/0.18 PVC 10.3±0.20 75±3 22
10C-2V BC 7/0.50 LDPE 9.5 BC 24/9/0.16 PVC 13.0±0.20 75±3 18
3D-2V BC 7/0.32 LDPE 3.0 BC 16/6/0.12 PVC 5.3±0.15 50±3 46
5D-2V BC 1/1.40 LDPE 4.8 BC 24/7/0.12 PVC 7.3±0.15 50±3 27
8D-2V BC 7/0.80 LDPE 7.8 BC 24/8/0.16 PVC 11.1±0.20 50±3 20
10D-2V BC 1/2.90 LDPE 9.7 BC 24/10/0.20 PVC 13.1±0.20 50±3 14
412/500/540
TYPE Center conductor Insulation Outer conductor Jacket Attenuation@68°F.(20°C)250mhz/100m
Material No/diameter Material Diameter Material Diameter Material Diameter
412 BC/CCA 1/2.15MM FPE 9.00MM SAT 10.30MM PE 12.30MM 4.80dB
500 BC/CCA 1/2.77MM FPE 11.50MM SAT 12.80MM PE 15.00MM 3.94db
540 BC/CCA 1/3.15MM FPE 13.00MM SAT 14.40MM PE 15.90MM 3.38db
                                                        
      
412.gif (6027 字节) Notes:
BC=Bare copper
CCS=Copper clad steel
CCA=Copper clad aluminum
FPE= Foamed polyethylene by gas Injection
TC=Tinned-copper
AA=Aluminium alloy
SAT=Sealess aluminium tube
AP=Aluminium polypropylene foil
APA=Aluminium polypropylene aluminium foil
PE=Soild polyethylene
PVC=Polyvnyl chloride
LDPE=Low density polyethylene
N/A= Not applicable
Packaging information
The factory normally uses three types of packaging:carton,easy-pull carton and reel. The standard length is 100M, 200M, 300M, and 1000 feet, But the customer's special requirement could be met as well.
The key features are as below:
Coaxial cable is widely used in telecom, TV and computer network today. Good cables create better transmission, namely high fidelity and low signal loss if the cables have good parameter, such as high shielding coverage and high signal-to-noise ratio. Usually, the connectors may be F-connectors, quick F connectors, BNC plugs etc, which can suit for different occasions and requirements.


OFC conductors
HD PE, foamed PE, cellular PE or air-spaced PE as insulation.
Multi-layered braiding especially double-layered and four-layered.The most inner layer is made of aluminum foil and the most outerlayer is made of bare copper wire, tinned copper wire or aluminum.wire. If necessary, more layers could be made between the two layers.